How to remove incoming link references from baseline?

Hi everyone,

Recently I had to move some links from the default DOORS Links modules to dedicated link modules.
When I started to move the links, some of the modules (the system requirements) were already baselined in a baseline set and some other modules (test specifications) were not yet baselined in the baseline set. So basically each test specification had 2 sets of links going that needed to be moved to the new link module, one set going to the current version of the system requirements and another set going to the baseline of the system requirements.
After moving the 2 sets of links to the new link module, the baseline of the system requirements has 2 incoming link references: one link reference stored in DOORS Links and one link reference stored in the new link module. When I look at the object properties or in the DOORS Links module, it shows that the old link does not exist anymore. But when I right-click on the incoming link arrow I see two in-links instead of one.
Does anyone know if it is possible to remove these in-link references from the baseline?

BR,
Emilia
EmiliaH - Fri Oct 12 05:11:14 EDT 2012

Re: How to remove incoming link references from baseline?
OurGuest - Wed Oct 17 13:13:18 EDT 2012

Two approaches:
--Track down the linkset involved and delete
--Track down link module involved and delete

Re: How to remove incoming link references from baseline?
jester76 - Thu Oct 18 11:03:34 EDT 2012

OurGuest - Wed Oct 17 13:13:18 EDT 2012
Two approaches:
--Track down the linkset involved and delete
--Track down link module involved and delete

Define the baseline set peoperly and baseline all the module within the set will resolve this issue automatically.

Re: How to remove incoming link references from baseline?
EmiliaH - Mon Oct 29 10:21:02 EDT 2012

After purging the link module the incoming link references disappeared from the baseline.
Thanks a lot for your answers!